Writing (Burning) Files to a CD

Repeating Chapters/Tracks

Press the REPEAT button on the remote control for repeating chapters or tracks.

PREV NEXT FR FF

SHUFFLE SETUP

REPEAT REP A-BCLEAR MENU

REPEAT

For DVDs, this will cycle through CHAPTER REPEAT ON, TITLE REPEAT ON and REPEAT OFF. The current chapter or title will be repeated.

For music, REP-ONEwill repeat the current track while REP-ALLwill repeat all tracks. REPEAT OFF will turn of repeating of tracks.

The REP A-Bbutton is used for repeating between several titles or tracks.

PREV NEXT FR FF

SHUFFLE SETUP

REPEAT REP A-BCLEAR MENU

REP A-B

1.Press the REP A-Bbutton to set the start position. The A TO B SET A message will be displayed.

2.Continue playing as normal until the desired end position and press REP A-Bbutton again. The A TO B SET B message will be displayed.

3.Press the REP A-Bbutton once again to cancel repeated playback.

Writing (Burning) Files to a CD

Files can be written to a CD-R or CD-RW, which is known as burning, as a way of backing up files. With a CD-RW, multi-session CDs are created enabling you to write to the CD as many times as you like.

Writing from a Flash Memory Card

There are two methods which you can use to write from a Flash Memory Card to a CD-RW.

When the QuattroDrive is connected to a TV/projector, follow the steps below.

1.Insert the Flash Memory Card as described in Inserting Flash Memory Cards on page 6.

2.Set up the disk burning options as described in DISC SETUP on page 18.

3.Insert a CD-RW or a blank CD-R into the QuattroDrive as described in Inserting and Removing a CD on page 6.

26