Installtion
DIN FRONT-MOUNT (Method A)
| Bend the tabs |
1. Dashboard | to secure the |
| Mounting Sleeve |
| in the dashboard. |
3. Screw
2. Mounting
Sleeve
Fig. 1
After inserting the Mounting Sleeve into the dashboard, select tabs on top, bottom, and sides, then bend them to secure the mounting sleeve in the dash board.(Fig. 1)
Follow the diagram in Fig. 2 for installing the rear mounting strap to the head unit. The rear
mounting strap will help keep the head unit from moving
around inside the dashboard. Fig. 2
1.Dashboard
2.Nut (5mm)
3.Spring washer
4.Screw (5 x 25mm)
5.Screw
6.Strap
7.Plain washer
Insert fingers into the groove in the front of frame to remove it.
Insert the keys supplied with the unit in the grooves on both sides. The unit can be installed or removed from the dash- board using these keys.(Fig. 3)
Fig. 3
Remove the half sleeve
E
A
Remove the two transport screws from
the top of the unit before installing.
5
