Installation
DIN REAR-MOUNT (Method B)
Installation using the screw holes on both sides of the unit.
1. Screw holes on the side of the unit.
2. Screws. Use either truss screws (5 x 8mm) or flush surface screws (4 x 8mm), depending on the shape of the screw holes in the bracket.
3. Vehicle’s Factory Mounting Bracket
4. Dashboard or Console
5. Hook (Remove this part)
Note: The mounting sleeve, outer trim ring, and the mounting strap are not used for this method of installation.
PARTS
2 | Keys | 2 | Flat Washers |
1 | Hex Nut | 1 | Mounting Bolt |
1 | Mounting Sleeve (not shown) | 1 | Faceplate Case (not shown) |
2 | Lock Washers | 1 | 1/8" Stereo Cable |
1 | Sheet Metal Screw | 1 | Remote Control |
1 | Metal Support Strap | 1 | External Microphone |
6
