Radio Operation
5.Press the +/- Buttons to adjust the vol- ume level.
6.Leave the unit idle for the new setting to take effect. The next time you turn the unit ON, the volume will automatically
be adjusted to the sound level you set here.
Radio Frequency Selection
The default frequency setting is in your country mode. However if you want to change the frequency to Europe or USA, please follow the step below:
1.Press the Open Button to open the faceplate.
2.Tilt the faceplate down about half way and push the faceplate to the left.
3.Pull the faceplate towards you to remove it.
4.Below the faceplate you will see a switch with the letter “A” on the right side and the letter “E” on the left side.
5.For use in the Americas slide the switch to the left or for use in Europe slide the switch to the right.
1. Choose a Radio Band
The unit comes with five bands for storing your favorite radio - three FM Bands (FM1, FM2, and FM3) and two AM Bands (AM1, and AM2) selects. Each of the five bands can store up to six preset stations, for a total of 30 preset memory stations. 18 FM
2.Manual Tune / Seek Function Manual Tune: Press the “>>” Button to adjust the radio to a higher frequency or press the “<<” Button to adjust the radio to a lower frequency.
Seek Function : Press and hold the >> Button for about 2 seconds, and the radio will search forward for the next strongest frequency, then stop.
3.Press and hold the “<<” Button for about 2 seconds, and the radio will search backward for the next strongest frequency, then stop.
3. Save Your Preset Stations
10
There are six numbered preset buttons which can store and recall stations for each band. While listening to a radio station you would like to save as a
4.Automatic Store/Preset Scan A. Automatic Scan & Store
While listening to the Radio, press and hold the F/PS Button. The receiver will automatically scan all of the frequencies of the band you are tuned to.
After scanning the frequencies it will auto- matically store the strongest signals to the
If there are any stations already saved to the
B. Scan Saved Stations
Press the F/PS button once to perform the scanning functions. In FM mode, press the F/PS button and the stations in all 3 FM bands will be scanned; press this but- ton in AM mode and scan all 2 AM Band Stations.
RDS Operation
Enhanced Other Networks (EON)
This unit is equipped with the latest tech- nology of EON control. EON control allows the receiver to monitor other stations for traffic announcements while you are lis- tening to the Radio or a CD. If there are any travel announcements on a nearby local station, then the receiver will tune to the station, turn up the volume, or inter- rupt the playback of the CD for the dura- tion of the announcement. At the end of the announcement the radio will return to its previous state ready for the next announcement.
AF - Alternative Frequencies
Press the AF button and the unit will choose the strongest FM signal for the selected
VRCD220S English PROOF Manual.indd 11
10/15/08 11:34:18 AM
