MP3 & WMA Disc Operation
that “TRK” will blink on the display.
Then use the VOL +/- Button to choose your desired track and press the SEL Button again to confirm the selection. The selected track will be searched for and then played.
3. File Search
Press the F/PS Button twice and the display will show “FILE SCH”. Press the SEL Button to enter the root folder of the disc. Use the VOL +/- Button to choose a folder in the root folder, then press the SEL Button to confirm. The selected folder will be opened.
AUX IN cable. Use the volume control to adjust volume.
2. RCA Output
The RCA Output Jack is on the back of the unit. (Refer to Wiring Diagram) This output is for connecting amplifier, equalizer, or other audio component that requires a
Follow the manufacturers instructions for the audio component that you are con- necting.
4. Character Search
Press the F/PS Button three times and the display will show “CHAR SCH”. This is for files by file names. Press the SEL Button and the first character will blink on the display. Use the VOL +/- Button to change the character. Press the SEL but- ton once to confirm the character entered and advance to the next character. After you have input the name, press and hold the SEL Button to confirm. The song near- est alphabetically to the name input will be found and then begin to play.
AUX IN & RCA Output
1. Auxiliary Input
The Auxiliary Input RCA Jacks are on the rear of the unit. To use the AUX IN feature you must use a RCA to 3.5mm cable. Insert the cable’s RCA plugs into the Red & White AUX IN jacks on the rear of the unit. Route the end of the cable with the 3.5mm jack to an area that is safe and convenient to the headphone jack of any external audio device such as walkman and disc- man. Press the “Mode” button to choose AUX. Connect any portable audio device such as a DVD player or VCD player to the
14
Maintenance Cleaning the Unit
Do not use any liquids to clean this unit. Do not use petroleum distillates to clean this unit. Use a clean, dry cloth to clean this unit.
Replacing the Fuse
Make sure the amperage matches the specified value when replacing the fuse(s). If the fuse is bad, check the power connec- tion and replace the fuse with a new one. If the same problem occurs, this might indi- cate a malfunction within the unit.
Warning
When replacing a fuse, do not use a fuse with a higher amperage rating than the fuse originally supplied to your unit, other- wise damage will result to your unit.
VRCD220S English PROOF Manual.indd 15
10/15/08 11:34:19 AM
