STOPPING YOUR UNIT
To stop the unit, move the ON/OFF switch to the OFF (0) position.
STARTING YOUR UNIT
Move the ON/OFF switch to the ON (I) position to turn on the unit.
WARNING: Do not use the unit without the blower tube properly attached to avoid flying debris and/or impeller con- tact which can cause serious injury. Al- ways wear eye protection to prevent rocks or debris from being blown or ricocheting into the eyes and face which can result in blindness or serious injury.
OPERATING POSITION
Eye Protection
BLOWER
WARNING: Inspect the area be- fore using the unit. Remove all debris and hard objects such as rocks, glass, wire, etc., that can ricochet, be thrown, or otherwise cause injury or damage during operation.
Use your unit as a blower for:
DSweeping debris or grass clippings from
driveways, sidewalks, patios, etc.
D Blowing grass clippings, straw, or leaves into piles, or removing debris from corners, around joints, or between bricks.
Direct air flow by directing the blower tube down or to one side. Always work away from solid objects such as walks, large stones, vehicles, and fences. Clean corners by starting in corners and moving outward. This will help prevent an accumulation of debris which could fly into your face.
Be careful when working near plants. The force of the air could damage tender plants.
MAINTENANCE
WARNING: Disconnect power source before performing maintenance.
GENERAL RECOMMENDATIONS
The warranty on this unit does not cover items that have been subjected to opera- tor abuse or negligence. To receive full value from the warranty, the operator must maintain unit as instructed in this manual. Various adjustments will need to be made periodically to properly maintain your unit.
BEFORE EACH USE
CHECK FOR LOOSE
FASTENERS AND PARTS
SBlower Tube
CHECK FOR DAMAGED OR WORN PARTS
Contact your authorized service dealer for replacement of damaged or worn parts.
S ON/OFF Switch
AFTER EACH USE
INSPECT AND CLEAN UNIT & LABELS
Stop unit and unplug extension cord.
SAfter each use, inspect complete unit for loose or damaged parts. Clean the unit using a damp cloth.
SWipe off unit with a clean dry cloth.
STORAGE
WARNING: Perform the following steps after each use:
SStop unit and disconnect from the pow-
er source.
S Allow motor to cool before storing or transporting.
SStore unit with all guards in place. Posi-
tion unit so that any sharp object cannot accidentally cause injury.
S Store unit unplugged, well out of the reach of children.
SEASONAL STORAGE
Prepare unit for storage at the end of the season or if it will not be used for 30 days or more.
If your blower is to be stored for a period of time:
SStop unit and disconnect from the pow-
er source.
SClean the entire unit.
SClean air vents and air inlet of debris.
6
