Installation
DIN FRONT-MOUNT (Method A)
After inserting the Mounting Sleeve
into the dashboard, select tabs on
top, bottom, and sides, then bend 
them to secure the mounting sleeve in the dash board.(Fig. 1)
Fig. 1
Follow the diagram in Fig. 2 for in- stalling the rear mounting strap to the head unit. The rear mounting strap will help keep the head unit from moving around inside the dash- board.
| 1. Dashboard | |
| 2. Nut (5mm) | |
| 3. | Spring washer |
| 4. | Screw (5 x |
| 25mm) | |
| 5. | Screw |
| 6. | Strap |
Fig. 2 | 7. Plain washer | |
|
| |
Insert fingers into the groove in the front of frame to remove it.
Insert the keys supplied with the unit in the grooves on both sides. The unit can be installed or removed from the dashboard using these keys.(Fig. 3)
Fig. 3
5
VRCD220S English PROOF Manual.indd 6
10/15/08 11:34:14 AM
