Installation Steps

Custom installing AVStream

During the installation process, if you choose a Custom installation, your options are limited (Figure 1).

Figure 1. Osprey 240e Custom Setup screen

This window allows you to choose individual components you may want to install. You can also change the location where components install.

Installing the video capture card

This manual covers one class of Osprey devices that include two PCI Express cards.

Class 6: o-240e, o-450e and related non-DSP PCI Express products

Both cards use the same driver. If you add a card from a different class, then you need to install the driver for that card.

When you add or move boards after the AVStream 4.6 driver is already installed, there are two possibilities:

You add a board of a different class from what is already in the machine. For example, an Osprey 240e is already in the machine with the current driver installed, and you want to add an Osprey 530. For this case, you have to obtain and install the driver install package for the new board.

You move a board from one slot to another, or if you add another board of the same type. For example, you might have an Osprey 240e in the machine, and want to add another Osprey 240e. In this case, the following sequence begins.

4

ViewCast

Page 10
Image 10
ViewCast 240E, 450E manual Custom installing AVStream, Installing the video capture card