Osprey 240e/450e User Guide
Motion Adaptive –
∙Set Deinterlacing to Off rather than Motion Adaptive – 2 Frame for absolute minimum processing time.
∙Set gamma correction to the default, 100.
∙For SECAM video, set the hue adjustment to the default, zero.
∙For
−Set Square Pixel (640 x 480) reference size, and capture full sized, 640 x 480 video
−Set CCIR (720 x 480) reference size, set Source Width to 720, and capture full sized, 720 x 576 video
∙For
∙Set the client application for YUY2 color format.
∙Turn off logos and
After you take these steps, latency will be 1 msec or less if the capture destination buffers are in system memory (they will be in system memory except in some
When you enable diagnostics, the latency is shown in a line of the form, latency per frame msec = 0.8554164, meaning that video frame delay from capture to return to client is 0.85 msec.
Notes
∙When you select Auto mode, some kinds of content cause the driver to frequently switch between Inverse Telecine and Motion Adaptive processing. Content such as title sequences and commercials are often telecine, but cuts between scenes generally break the telecine sequence, forcing the driver to resynchronize. It takes it a number of frames to lock on to the new sequence. The driver drops back to the Motion Adaptive algorithm as soon as it becomes aware that telecine sync has been lost. However, it may take it several frames to discover that this has happened; these frames are not correctly deinterlaced.
∙If the content is consistently telecine, that is pure movie content, then either Auto or Inverse Telecine is recommended for perfect recovery of the original progressive format.
∙If the content is telecine with
∙If the content format is a rapidly changing mix of telecine and video, or is all video, or is of unknown type, the Motion Adaptive setting gives the most consistent results. The quality of telecine sequences is not the best possible, but there are no instances of frames not deinterlaced at all due to telecine
ViewCast | 41 |
