7.Remove, if present, the rubber protection band which can be found at the edge of the hole. (Don‘t throw this rubber away, but keep it)
8.Remove the fastening braces.
(Don‘t throw these braces away, but keep them)
9.Moisten a cloth with an alcohol solution or an other degreasing solution and clean the edge on the roof all around. Don‘t spray, in case you damage the interior
10.Place the TopCooling on the roof of the cab and guide it through the hole in the roof.
Note: Do this always with two persons to avoid any damage
12. System seen from the inside of the cabin.
13. If necessary, make the holes of the panel bigger.
3
