Listening to the Radio
1.Switch on your CD clock radio by pressing the Power button. The Power indicator LED will light.
2.Slide the Function switch to the required waveband.
3.Tune in to the desired station by rotating the Tuning control. The station frequency is indicated in the dial scale.
The Wire aerial located on the rear of your CD clock radio is for FM reception. The wire should be fully extended and positioned for optimum reception.
For MW reception there is a built in ferrite aerial. Rotate your CD clock radio to the position giving best reception.
4.Adjust the volume by rotating the Volume control.
5.On the FM waveband if the station being received is weak some hiss may be audible, to reduce the hiss slide the Function switch to FM position. The FM stereo indicator will be removed from the display.
6.The radio can be switched off by pressing the Power button. The Power indicator will switch off
1
2
34
If you need any further advice, please call our Technical Helpline on :- 020 8758 0338
5
6
10
cr9946 instruction book.PMD | 11 | 4/19/2004, 4:49 PM |
