Roberts Radio CR9946 manual Specifications, Circuit Features, Time Zones, Power Requirements

Time Zones

Your CD clock radio is set up to UK time zone 12 GMT (UTC). Should you wish to take your clock radio to other countries the time zone will need to be reset.

1.Ensure your CD clock radio is switched off - Power indicator not lit.

2.Press and hold down the Memory/Time Zone button - the display will show the time zone currently selected e.g 12.

3.Whilst holding down the Time Zone button adjust the time zone using the Up or Down buttons. See following table for details of time zones and their Offsets relative to GMT.

Specifications

Power Requirements

Mains	AC 230 volts, 50Hz	only
Back-up Battery	CR2032 Lithium (2-5year life)
Frequency Coverage
FM	87.5 - 108MHz
MW	520 - 1610kHz
Circuit Features
Loudspeakers	2 x 8 ohms
	Output power 2 x 350mW

Zone	Offset (Hours)
00	GMT +/-12
01	GMT +11
02	GMT +10
03	GMT +9
04	GMT +8
05	GMT +7
06	GMT +6
07	GMT +5
08	GMT +5

09GMT +3

10GMT +2

11GMT +1

Zone Offset (Hours)

12GMT

13GMT -1

14GMT -2

15GMT -3

16GMT -4

16 GMT -5

18GMT -6

19GMT -7

20GMT -8

21GMT -9

22GMT -10

23GMT -11

Aerial System	FM	Wire Aerial
	MW	Built-in Ferrite aerial

21

cr9946 instruction book.PMD 22 4/19/2004, 4:49 PM