Programmed play
By programming the player you can play up to 20 tracks in any desired order.
1.Whilst the CD is in STOP mode, press the Memory/TIME ZONE button. The display will show ‘ P 01’.
2.Select the first track using the UP/F.skip or Down/B.skip buttons. The track number will flash on the display. Store this track by pressing the Memory/TIME ZONE button.
3.Repeat the above steps until you have completed your program. Press the Play/Pause button to commence play of the selected tracks.
1
2
2
Note: the display will revert to showing time after a few seconds of inactivity.
2
3
Checking a programme
1. Whilst the CD is in STOP mode, repeatedly press the Memory/TIME ZONE button to step through the tracks programmed.
1
Erasing a programme
1. Press the Memory/TIME ZONE button until the Memory indi- cator flashes.
2. Press the Stop button to erase the programme. Programmes are | 1 | 2 |
|
also erased by opening the CD door and interrupting the mains supply.
15
cr9946 instruction book.PMD | 16 | 4/19/2004, 4:49 PM |
