Operating your radio - DAB
1. Fully extend the wire aerial.
2
2.If your clock radio is in standby mode, press the Standby button [On/off on the remote control] to switch on your clock radio.
3.Press and release the Function button to select DAB. The display will show "DAB" and then " Now tuning" for a few seconds.
3
4.If this is the fi rst time the clock radio is used a quick scan of UK Band III DAB channels will be carried out. If the clock radio has been used before the last used station will be selected.
5.The fi rst station in the list of stations found will be played. The display will show the station name in the fi rst line of the display and other information in the second line.
6.When the Auto tune is complete the fi rst station (in
7.If the station list is still empty after the Autotune your radio will display "Station not available".
8.If no signals are found it may be necessary to relocate your radio to a position giving better reception.
7
