Setting the clock manually
Normally your clock radio will set its clock automatically via the DAB signal. If no DAB signal is available and you need to set the time manually, please follow the procedure shown below.
Note: The DAB signal will always override any manual time setting.
1.To set the clock time, press the On / Standby button to switch on the clock radio. Press the Alarm button to enter the menu setup. "SET ALM" will appear on the display.
2.Press the Tuning Up or Down button until "MANU CLK" appears on the display. Press and release the Select button to enter the manual setting procedure. The hour digits will then flash on the display.
3.Press the Tuning Up or Down buttons to select the desired hour.
4.Press the Select button the minute digits will flash on the display.
5.Press the Tuning Up or Down buttons to select the desired minute.
down
1
2,4
SNOOZE
TUNING | up |
2,3,52,3,5
23
