You need tone-out setup information from the agency you want to be alerted for or from online sources. Uniden America Corporation does not have information for local tone-out systems.

Setting Tone-Out Standby

Menu

Tone-Out for ...

Tone-Out Standby

Turn the scroll control until the tone-out standby mode you want to select appears. Then press the scroll control to select it.

Setting up Tone-Out

MenuTone-Out for ...

Tone-Out Setup

Tone-Out 1 - 10 select the tone-out you want to work with.

Edit Name - enter the name you want to assign to the tone-out you selected.

Set Frequency Lets you set the tone-out’s frequency.

Edit Frequency Turn the scroll control to enter the tone-out’s frequency.

Set Modulation:

Auto - the scanner uses the default modulation for the frequency band.

FM - the scanner uses FM (frequency modulation) for the frequency band.

NFM - the scanner uses narrowband FM for the frequency band.

Note: The default setting is Auto.

Set Attenuator Turn the scroll control to select On or Off.

Using Weather Alert (SAME)

111

Page 111
Image 111
Uniden BCD396T owner manual Setting Tone-Out Standby, Setting up Tone-Out, Tone-Out for Tone-Out Standby, 111