•See “Setting the Channel Delay Time” on Page 74
•See “Setting ID Scan/Search (Trunked Systems Only)” on Page 75
•See “Reviewing Locked Out Frequencies” on Page 104
•See “Setting Channel Attenuation (Conventional Channels Only)” on Page 88
•See “Deleting Systems” on Page 81
•See “Copying Systems” on Page 81
•See “Setting System Frequencies” on Page 70
•See “Entering/Editing LTR Channel Groups” on Page 70
Setting System Frequencies
Menu
Program System
Select the system
Set Frequencies
New Frequency
Input a system frequency, then press the scroll control. The scanner then prompts you to enter the LCN for the entered frequency. Enter the LCN, then press the scroll control.
To enter additional frequencies, press Menu , use the scroll control to select New Frequency, then repeat the above.
Entering/Editing LTR Channel Groups
To enter channels in a system, first set up a channel group (or groups) to hold the channels. Then, enter the channel and channel parameters in the group(s).
Setting Up a Channel Group
Menu
Program System
Select the system
Edit Group
Programming Radio Systems
70
