•Set CC Bands: Lets you select the Close Call band settings. You can turn the following bands on or off.
VHF Low 1 (25.0000 MHz) VHF Low 2 (54.0000 MHz)
Air Band (108.0000 - 136.9750 MHz) VHF High1 (137.0000 MHz)
VHF High2 (224.9950 MHz) UHF (400.0000 - 512.0000 MHz) 800MHz+ (806.0000 - 956.0000 MHz)
Use the scroll control to select a band, press the scroll control, then use the scroll control to select On or Off and press the scroll control. Turning off undesired bands speeds up Close Call operation. (The Close Call feature does not work for frequencies greater than 956 MHz.)
Close Call Hits
When the scanner detects a Close Call hit, it alerts you according to the Override and Alert settings in the previous section. While listening to a Close Call hit, you can press Hold to hold on the hit frequency, press the scroll control to quickly save the frequency into memory, press L/O to lock out the frequency from Close Call and Search operation, or wait for the transmission to end. If you are in Close Call Only or Close Call Override mode, and you do not press any key, the scanner returns to its previous operation after the transmission ends and the set delay time expires.
If you are holding on the frequency, press Hold again to resume the previous operation.
