correct modulation type for the system you are programming.

Setting Channel Attenuation (Conventional Channels Only)

Menu

Program System

Select the system

Edit Group

Select the group

Edit Channel

Select the channel

Set Attenuator

This setting controls whether the scanner attenuates signals on this channel. Select your setting, then press E.

On - the channel is attenuated by about 18 dB.

Off - the channel is not attenuated.

Notes:

The default setting is Off.

For trunked systems, the attenuation is a system- level setting.

You can also toggle this setting by holding on the channel and pressing Func and E.

Setting the Frequency Step (Conventional Channels Only)

Menu

Program System

Select the system

Edit Group

Select the group

Edit Channel

Select the channel

Programming/Editing Optional Settings

88

Page 88
Image 88
Uniden BCD396T owner manual Setting Channel Attenuation Conventional Channels Only