
On-Air Cloning
Menu Xfer Information
On-Air Clone
•Start Cloning Start
•Set Frequency Lets you set the frequency where your scanner receives the cloning broadcast.
•Set Modulation Lets you set the cloning broadcast’s modulation type.
To clone (copy) data from a transceiver to a BCD396T scanner, you need a transceiver, a PC that has an audio input, and a cable to connect your PC’s sound card to the transceiver. Follow the directions supplied with the Uniden Advanced Scanner Director Software (available online at http://www.uniden.com) to construct a cable and use
When you are receiving the cloning broadcast and are ready to clone the scanner, select Start Cloning on the scanner. The scanner receives the data from the transmission
When the transfer is complete, Complete appears. If the transfer did not work, Error appears.
Other Settings
58