
This setting controls whether the attenuator will be on or off for the current system. Select your setting then press the scroll control.
Off - the attenuator is off.
On - system frequencies are attenuated by about 18 dB.
Notes:
•Turn on this setting if you are near strong signal sources. Attenuation can help reduce interference and desensitization that strong signals create.
•You can also turn this setting on or off by holding
on a trunked system, then pressing Func + E.
Entering/Editing Motorola Channel Groups
To enter channels in a system, first set up a channel group (or groups) to hold the channels. Then, enter the channel and channel parameters in the group(s).
Setting Up a Channel Group
Menu
Program System
Select the system
Edit Group
The scanner creates a group with a default name of Group nn. nn increments by one for each new group you create within a system.
Next, refer to the appropriate section to set
•See “Entering/Editing the Group Name” on Page 82
•See “Setting the Group Quick Key” on Page 83
•See “Deleting Groups” on Page 83
•See “Copying Systems” on Page 81
Programming Radio Systems
65