1.Press Func to hold on the system (or hold down Func then rotate the scroll control to select the

system).

2.Continue to hold Func and press the number key corresponding to the channel group you want to activate or deactivate.

Locking/Unlocking Systems

Follow these steps to lock out a system so that it does not scan even if its quick key is selected.

1.While holding down to select the system.

Func

, rotate the scroll control

2.Continue to hold down Func and press L/O to lock out the system. SYSTEM LOCKED appears.

3.Repeat Steps 1 and 2 to unlock a system you have previously locked.

Locking/Unlocking Channels

Follow these steps to lock out a channel so that it does not scan even if its system and channel group are selected.

1.While holding down Func , rotate the scroll control to select the system where the channel is stored.

2.Release Func then press Hold within 2 seconds to hold on the system.

3.Rotate the scroll control to select the channel you want to lock or unlock.

4.Press L/O to lock or unlock the channel.

You can also lock out an active channel by pressing L/O while the scanner is stopped on the channel.

ID Scan/ID Search Mode

While you are scanning a trunked system, the scanner can be in either ID Scan or ID Search mode:

Basic Operation

46

Page 46
Image 46
Uniden BCD396T owner manual Locking/Unlocking Systems, Locking/Unlocking Channels, ID Scan/ID Search Mode