•NOAA WX - the scanner skips known NOAA weather frequencies.
•Band
Program Band - lets you program a specific band for broadcast screen. Turn the scroll control to select an option then press the scroll control to change the setting.
•Band
Set Lower Limit - turn the scroll control to enter the lower limit of the frequency range, then press the scroll control to set it.
Set Upper Limit - turn the scroll control to enter the upper limit of the frequency range, then press the scroll control to set it.
Finding Repeater Output
Frequencies
Menu
Srch/CloCall Opt
Repeater Find
This feature sets whether the scanner tries to tune to a repeater output frequency during Close Call operation when it detects a transmission on a repeater input frequency. Since you can normally only hear one side of a conversation when you listen to an input frequency transmission, turning this feature on can let you hear both sides of the conversation.
On The scanner automatically applies repeater reverse to detected transmissions. If the scanner detects the transmission on the output frequency, it beeps, Repeater Find appears, and it remains on the output frequency until transmissions end. If it does not detect a transmission on the output frequency, it remains on the original frequency.
