A Look At The Display

(illus - show display)

The display has indicators that show the scanner's current operating status. The display information helps you understand how your scanner operates. The dark area shown above the icons in this illustration is the text display area. Information about the currently tuned frequency appears here.

SYS - shows the currently activated system, appears with numbers (0-9). The currently active system indicator flashes.

ATT - appears when the attenuation feature is turned on (see “Setting System Attenuation (Trunked Sys- tems Only)” on Page 81).

PRI - appears when the priority feature is turned on (see “Priority Scan” on Page 54).

- appears when you lock the keypad (see “Locking/Unlocking the Keypad” on Page 53).

- alerts you when the battery power gets low.

GRP - shows the currently activated group, appears with numbers ( - ). The currently active group indicator flashes.

AM/FM/NFM - appears to show the type of transmission.

L/O - appears when you manually select a channel you locked out or a skip frequency.

- appears when you hold down function.

Func

to select a

- appears when the scanner is set to a Close Call feature mode (see “Using the Close Call Feature” on Page 100).

Setting Up Your Scanner

41

Page 41
Image 41
Uniden BCD396T owner manual Look At The Display, Illus show display