See “Entering/Editing Motorola Channels” on Page 66

See “Setting I-Call (Motorola Analog and EDACS Systems Only)” on Page 77

Entering/Editing Motorola Channels

Refer to the appropriate section to change a channel setting:

See “Setting the Digital Decode Threshold (Motor- ola and Conventional Systems Only)” on Page 79

See “Editing the Channel Name” on Page 84

See “Setting Channel Lockout” on Page 89

See “Deleting Channels” on Page 89

See “Copying/Pasting Channels” on Page 90

To program another channel within the same group, press Menu , then repeat the above. To create another channel group and enter more channels, press Menu three times, then proceed from “Entering/Editing Motorola Channel Groups” on Page 65.

Programming EDACS Systems

Menu

Program System

New System

EDCS

Confirm? Yes=”E” / No=”.”

Next, rotate the scroll control to select the type of EDACS system you want to program, then briefly press the scroll control to select it.

WIDE - Use for wideband EDACS systems

NARROW - Use for narrowband EDACS systems

SCAT - Use for EDACS SCAT (Single Channel Autonomous Trunking)

Confirm? Yes=”E” / No=”.”

Programming Radio Systems

66

Page 66
Image 66
Uniden BCD396T owner manual Programming Edacs Systems, Entering/Editing Motorola Channels