Scanner | The system you | Set the scanner to |
won’t | are trying to scan | scan LTR or EDACS |
track a | might be LTR or | systems. Review |
trunked | EDACS. | “Programming LTR |
system. |
| Systems” on Page 69 |
(continued) |
| and “Programming |
|
| EDACS Systems” on |
|
| Page 66. |
Scanner | No ID’s have been | Program one or more |
won’t stop | programmed. | ID’s or use the ID |
scanning |
| Search mode. |
a trunked |
|
|
system. |
|
|
| The ID’s you have | Wait for the ID’s to |
| stored are not | become active or scan |
| active. | another system. |
Scanner | The squelch might | Adjust the squelch |
won’t | need to be | threshold. See |
acquire | adjusted. | “Turning On the |
the data |
| Scanner and Setting |
channel. |
| the Squelch” on |
|
| Page 43. |
| The frequency | Check your frequency |
| used for the data | list for the data |
| channel might be | channel. |
| missing. |
|
Missing | The scanner might | Change to a Type 1 |
replies to | need to be | scanner setup. See |
conver- | changed to a Type | “Programming |
sations. | 1 scanner setup. | Motorola Systems” on |
|
| Page 62. |
| The fleet map | Try another preset fleet |
| might be incorrect. | map or program your |
|
| own fleet map. |
| One or more of | Make sure all the |
| the system’s | system’s frequencies |
| frequencies might | have been entered. |
| not be entered. |
|
| The system you | Set the scanner to |
| are trying to scan | scan LTR or EDACS |
| might be LTR or | systems. Review |
| EDACS. | “Programming LTR |
|
| Systems” on Page 69 |
|
| and “Programming |
|
| EDACS Systems” on |
|
| Page 66. |
