•Keypress The backlight turns on when any key is pressed then stays on for 10 seconds.
•Infinite The backlight turns on when you press then stays on until you press again.
Pressing any key while the backlight is on extends the
backlight period. Pressing while the backlight is on turns off the backlight.
Setting the Audio AGC
| Settings | Set Audio AGC |
Menu |
|
|
•On Audio AGC is turned on.
•Off Audio AGC is turned off.
This setting helps balance the audio level you hear as you listen to different radio sources so you can hear them at a similar volume. Use this setting if you listen to an audio source that has natural changes in audio level for which you want to compensate.
Adjusting the Display Contrast
Menu
Settings
Adjust Contrast
Contrast 1 - 15 the scanner adjusts the display to the contrast level you select.
This setting controls the display’s contrast (how light or dark it appears). Use this setting to change the contrast for different viewing conditions. There are 15 contrast settings. You see the change in contrast as you scroll through the settings.
Initializing the Scanner’s Memory
Important! This deletes all preprogrammed data. You cannot restore preprogrammed data that has been deleted.
To initialize the scanner’s memory, turn off the scanner. Then, press 2, 9, and Hold while turning it on.
Other Settings
55