•Total channels are limited to about 5500.
•Channels that have text tags use more memory than those that do not. If you use a text tag for every channel, total channels are reduced from 5500 (2500 is typical).
Programming Conventional Systems
Menu
Program System
New System
Conventional
Confirm? Yes=”E” / No=”.”
The scanner creates an empty conventional system,
with a default name of System n C. n is a number that increments as you add new systems. C indicates that this is a conventional system.
Refer to the appropriate section to set
•See “Editing the System Name” on Page 72
•See “Editing the System Quick Key” on Page 73
•See “Setting System Lockout” on Page 73
•See “Setting the System Hold Time” on Page 74
•See “Setting the Channel Delay Time” on Page 74
•See “Deleting Systems” on Page 81
•See “Copying Systems” on Page 81
•See “Entering/Editing Conventional Channel Groups” on Page 60
Entering/Editing Conventional Channel Groups
To enter channels in a conventional system, first set up a channel group (or groups) to hold the channels.
Programming Radio Systems
60
