•See “Deleting Groups” on Page 83
•See “Editing the Channel Name” on Page 84
•See “Setting Group Lockout” on Page 83
Entering/Editing EDACS Channels
Refer to the appropriate section to change a channel setting:
•See “Editing the Channel Name” on Page 84
•See “Setting Channel Lockout” on Page 89
•See “Deleting Channels” on Page 89
•See “Copying/Pasting Channels” on Page 90
To program another channel within the same group, press Menu , then repeat the above. To create another channel group and enter more channels, press Menu three times, then proceed from “Entering/Editing EDACS Channel Groups” on Page 68.
Programming LTR Systems
Menu
Program System
New System
LT
Confirm? Yes=”E” / No=”.”
The scanner creates an empty LTR system, with a
default name of System n L.
n is a number that increments as you add new systems. L indicates that this is an LTR system.
Next, refer to the appropriate section to set system- wide options. For most settings, you can accept the default. However, for the items in bold, you must enter information in order for your scanner to scan the system.
•See “Editing the System Name” on Page 72
•See “Setting the System Hold Time” on Page 74
•See “Editing the System Quick Key” on Page 73
Programming Radio Systems
69
