2.Turn the scroll control until the type of search you want appears, then press the scroll control to select it. A search band appears.

If all systems are locked out, All Locked! appears and the scanner does not store any fre- quencies.

When you select a search range, the scanner looks for active frequencies within that range and Search and Store appears on the display’s lower line and the system name and search range name appear on the display’s upper line. When the scanner finds an active transmission, it checks to see if the frequency has already been stored in the system. If the frequency has already been stored, the scanner continues to search. If the frequency has not been stored, it stores the frequency into a group named Found Channels, then resumes searching. The scanner creates this group if it doesn’t already exist.

Storing a Trunked System

You can store talk group ID’s into the system you selected in “Selecting a System”. Otherwise, the scan- ner stores talk group ID’s in a new group it creates.

Note: Trunked system search and store does not work if an EDACS SCAT system is selected, a system with no frequency is selected, the selected system is locked out or the quick key for system to which the system belongs is turned off, and the group you selected to store found talk group ID’s contains more talk group ID’s than the maximum set in Max Auto Store.

1.Follow Steps 1-3 under “Selecting a System”. A search option appears.

2.Turn the scroll control until the type of search you want appears, then press the scroll control to select it. A search band appears. If all systems are locked out, All Locked! appears and the scan- ner does not store any frequencies.

Searching and Storing

98

Page 98
Image 98
Uniden BCD396T owner manual Storing a Trunked System