Custom Search
Custom Search lets you program and search 10 custom search ranges. You can search any of these ranges simultaneously and select each custom search range you set. During custom search, the scanner searches starting with the lowest frequency in the search range you select to the highest frequency in the range.
Notes:
•Search ranges are preset. See “Editing a Custom Search Range” on Page 94 to change the range.
•You cannot turn off all custom search ranges.
1.Press Menu then turn the scroll control until Search for ... appears. Then press the scroll control. Or, press Func + Scan/Srch, then select No. One of the search feature options appear.
2.Turn the scroll control until Custom Search appears, then press the scroll control to select it. The scanner starts custom search of the custom search range you selected, stopping on any trans- mission it finds and displaying the frequency. Turn the scroll control to change the search direction. An arrow appears, showing the current search direction.
To turn search ranges on or off, press 0 and
To hold searching, press Hold. To resume searching, press Func then press Scan/Srch or Hold again.
To lock out a frequency found while searching, press L/O. Search Lockout? appears. Press the scroll control to lock out the frequency or No to continue monitoring.
If you turn off the active custom search range, the scanner skips to the next custom search range and continues searching.
Searching and Storing
93
