Setting System Frequencies
Menu
Program System
Select the system
Set Frequencies
New Frequency
Input a system frequency, then press the scroll control. The scanner then prompts you to enter the LCN for the entered frequency. Enter the LCN, then press the scroll control.
To enter additional frequencies, press Menu , use the scroll control to select New Frequency, then repeat the above.
Note: The scanner only accepts a single frequency and no LCN for SCAT systems.
Entering/Editing EDACS Channel Groups
To enter channels in a system, first set up a channel group (or groups) to hold the channels. Then, enter the channel and channel parameters in the group(s).
Setting Up a Channel Group
Menu
Program System
Select the system
Edit Group
The scanner creates a group with a default name of Group nn. nn increments by one for each new group you create within a system.
Next, refer to the appropriate section to set
•See “Entering/Editing the Group Name” on Page 82
•See “Setting the Group Quick Key” on Page 83
Programming Radio Systems
68
