CD track programming
In addition to playing of complete CDs, selected tracks, or a random selection, the CD player allows you to programme a sequence of up to 20 tracks to be played in whatever order you choose.
1.With the unit in CD mode and with a CD inserted, make sure that the CD is stopped (press the Stop / Select button).
2.To enter programming mode, press the Menu button.
3.Choose the first track using the
4.Press the Menu button to enter the selected track into the programme.
5.Choose another track using the
6.Repeat step 5 to store as many as 20 tracks in the programme.
7.When the programme is complete, press the Play / Pause button to start playing. The tracks will then be played in the order that you have just programmed.
8.Pressing the Stop / Select button, or switching to another operating mode will erase the programme.
Note: If you are programming the tracks using a CD with MP3 or WMA files in folders (see the following pages), you can also use the Up or Down Folder buttons to specify the folder in steps 3 and 5 above.
1
2
3,5 | 3,5 |
4,5
7
CD / MP3 / WMA
CD
CD
CD
If you need any further advice, please call our Technical Helpline on :- | 27 |
020 8758 0338 |
