Standby brightness control
The brightness of the display when the unit is in standby mode may be adjusted. If you use the unit in the bedroom, you may prefer a lower standby brightness level than the standard setting.
1.Press and hold the Menu button so that the display shows "Set Brightness" on the lower line of the text display
2.Press and release the Select button to show the current setting.
3.Press and release the Tuning Up or Down buttons to change the standby brightness level. The backlight level will change at the same time so that you can see the effect of the change.
4.Press and release the Select button to save the new setting.
The default setting after a system reset is 5. Possible brightness values range from 1 - 7.
1
2,4
33
Clock and Alarms
If you need any further advice, please call our Technical Helpline on :- | 39 |
020 8758 0338 |
