Cautions

Do not allow this sound system to be exposed to water, steam or sand. Do not leave your sound system where excessive heat could cause damage.

It is recommended that the DAB band is used for radio listening where possible since this may result in better sound quality and freedom from interference than will often be obtained on the FM band.

The name plate is located on the rear of your sound system.

The sound system shall not be exposed to dripping or splashing and that no objects filled with liquids, such as vases, shall be placed on the sound system.

It is recommended to operate the product such that there is a minimum distance (10cm recommended) to adjacent objects in order to ensure good ventilation.

The ventilation of the product should not be restricted by covering it or its ventilation openings with items such as newspapers, tablecloths, curtains etc.

No naked flame sources such as lighted candles should be placed on the product.

It is recommended to avoid using or storing the product at extremes of temperature. Avoid leaving the unit in cars, on window sills, in direct sunlight etc.

Specifications

 

Circuit features

 

Power Requirements

 

Output Power

 

2 x 7 watts

Mains

AC 230 volts, 50Hz

only

 

 

Battery (Remote control)

2 x AAA

Headphone socket

 

3.5mm dia

 

 

Auxiliary in socket

 

3.5mm dia

Frequency Coverage

 

Line Out socket

 

3.5mm dia

FM

87.5-108MHz

 

 

 

DAB

174.928 - 239.200MHz

Aerial System

FM

Telescopic aerial

 

 

 

DAB

Telescopic aerial

The Company reserves the right to amend the specification without notice.

46

Page 48
Image 48
Roberts Radio MP-SOUND 43 manual Specifications Circuit features, Power Requirements