Rotary tuning
1.Press the On/Off button to switch on your radio.
2.Select the required waveband by repeatedly pressing the Band button. For the FM waveband fully extend the Telescopic aerial angle and rotate, if necessary, to obtain best reception.
3.Rotate the Tuning control to change the frequency in the following increments:-
FM 50kHz
MW 1kHz
LW 1kHz
4.When a station is correctly tuned, the tuning indicator will appear in the display.
5.When the waveband end is reached the radio will bleep and continue tuning from the opposite waveband end.
6.Set the Volume control and Tone controls to the desired settings.
7.To switch off your radio press the On/Off button.
9