Operating you radio
Your radio is equipped with four tuning methods:- Scan tuning, Rotary tuning, Manual tuning, and Memory preset tuning. When switched on your radio will display the waveband and frequency in use. A graphical display similar to a conventional radio tuning dial will be shown in the bottom half of the display.
Scan tuning
1.Press the On/Off button to switch on your radio.
2.Select the required waveband by repeatedly pressing the Band button. For the FM waveband fully extend the Telescopic aerial angle and rotate, if necessary, to obtain best reception.
3.Press and hold down either the Tuning up or Tuning down buttons for more the 0.5 sec to commence scan tuning.
4.Your radio will scan the selected waveband and stop automatically when it finds a station of sufficient strength. The tuning indicator 
and station frequency will appear in the display.
5.To recommence scan tuning, press and hold down either the Tuning up or Tuning down buttons for more the 0.5 sec.
6.When the waveband end is reached the radio will bleep and continue tuning from the opposite waveband end.
7.Set the Volume control and Tone controls to the desired settings.
8.To switch off your radio press the On/Off button.
7
