Setting the clock
1.The clock will start running when the batteries are installed or when the radio is connected to the mains supply. The display will show 0:00 .
2.Ensure that the radio switched off.
3.Press and hold down Time set button until the hours digits begin to flash in the display.
4.Press the Tuning up/down buttons to set the required hour. The clock uses the 24 hour system e.g. 2:00pm is shown as 14:00
5.Press the Time set button, the minute digits will flash in the display.
6.Press the Tuning up/down buttons to set the required minute.
7.Press the Time set button to complete time setting.
If you need any further advice, please call our Technical Helpline on :-
020 8758 0338 | 6 |
