Roberts Radio R9968 manual Setting the alarm to buzzer

Setting the alarm to buzzer

1.Set the alarm time as previously described.

2.Press the Alarm button. The Alarm icon will flash in the display for a few seconds before returning to the clock display.

3.While the Alarm icon is flashing, press the Alarm button

again to select the buzzer alarm mode. The Buzzer icon will appear and flash in the display.

4.Press the Alarm Set button to confirm the alarm.

5.The bottom display will stop flashing, the Alarm icon and the

Buzzer icon will remain on the display.

6.The buzzer alarm will sound at the preset time. It will increase in volume, tone and frequency, over the period of one minute, and then fall silent for one minute. This cycle will be repeated for 60 minutes.

7.To switch off the alarm until the next day, press the On/Off Sleep button.

8.To switch the alarm off permanently, press the Alarm button. The

Alarm icon will flash in the display for a few seconds before reverting to the clock display.

2

3

4

2

2

If you need any further advice, please call our Technical Helpline on :-

020 8758 0338 (Mon-Fri)

13