Setting the alarm time
The alarm is always set in local time, with the Home icon 
displayed.
1.Press the Alarm button. The Alarm icon 
will flash in the display for a few seconds before returning to the clock display.
2.While the Alarm icon 
is flashing, press the Alarm button
again to select the buzzer alarm mode. The Buzzer icon 
will appear and flash in the display.
3.Press and hold the Alarm Set button until the alarm time flashes in the display.
4.Press the Hour button to change the hour.
5.Press the Min. button to change the minutes.
6.Press the Alarm Set button to confirm the correct time.
7.The bottom display will stop flashing and the Alarm icon 
will remain on the display.
8.Press the 12/24 button to switch between 12 and 24 hour clock formats. When the clock is set to 12 hour display an AM or PM indicator will display. Make sure that the correct 12 hour cycle is selected.
12
34
56
7
12
