Operating your radio
1. Switch on your radio by rotating the Volume control anti- clockwise until a click is heard. The Power LED will light up
2. Set the Waveband selector to the required waveband.
3.Adjust the Volume control until a hissing sound is heard.
4.Rotate the Tuning knob to select the desired station. On MW and LW the Tuning scale is marked in kilohertz (kHz). On FM the Tuning scale is marked in Megahertz (MHz).
5.For MW and LW reception rotate your radio to the position giving best
reception.
6.For FM reception fully extend the Telescopic aerial and then angle and rotate for best reception.
7. Adjust the Volume control to the required sound level. | 6 |
8. To switch off your radio rotate the Volume control fully clockwise until a click is heard.
Note : The telescopic aerial is inoperative on MW and LW.
If you need any further advice, please call our Technical Helpline on :-
1
24
020 8758 0338 | 4 |
|
