lap running time will appear in Row 3. Continue to press “B” for each lap reading as needed. Your
STOP/END OF EVENT: At the end of the event, press “A”, STOP indicator appears. The speed and time of the last lap will appear in the display (lap number and time in the top row and speed in the middle row) and the lower row will show the last recorded lap time.
RESET: After you have completed timing and reviewing all information, press “B” for two seconds to reset the Speed Timer to all zeros.
ADVANCED FUNCTIONS: Your
ADVANCED FUNCTIONS CANNOT BE USED IF YOU HAVE RESET THE DISPLAY TO ALL ZEROS.
Max - Slow - Average and Memory Recall
Your
Max - Slow - Average Lap Speed & Time
The MAX indicator means the Fastest Lap Time is shown in the top row and the associated Maximum speed of all readings taken is displayed in the middle row. The Fastest lap number is displayed in the LAP counter.
Press “F” again to display the SLOWEST Lap Speed, Time and Number. The SLOW indicator will appear.
Press “F” again, to display the Average Lap Speed and Time of all readings. The AVG indicator will appear. The Lap Counter will show the total amount of readings taken.
300 Memory Recall
After sequencing through the Fastest, Slowest and Average Lap information, press or hold “F” to review up to the previous 300 readings in speed, time and lap number up through 999 laps. The
The lap speed will appear in the middle row and the lap number and time will appear in the top row.
During Memory Recall use, you may press “E” at any time, to return to the current or previously taken readings.
