Notes:
For speaker wires that have proprietary connectors, you may strip the end of the wires to allow connection to the receiver. However, check with the speaker manufacturer before doing this, as it may void the warranty.
Make sure the exposed tips of each cord do not touch each other, and that they are fully inserted into the terminals.
Connecting the receiver to an AC power outlet
Plug the AC power cord in only after all speakers are connected to the receiver.
Power cord hole
To connect the receiver to an AC power outlet:
1Open cover of the cable storage compartment on the bottom of receiver, then unwrap the cable and extend it to the desired length.
2Close the cover and make sure that the extended cable is not pinched and comes out from the power cord hole as shown in the diagram.
3Plug the AC power plug into a power outlet.