Connecting the sender to the AC power adapter

Sender back panel

Plug the AC power adapter in only after your amplifier is connected to the sender.

Caution: To avoid risk of fire, and to prevent damage, only use the AC adapter supplied with your universal wireless rear speaker kit.

Connecting the receiver

Connecting the receiver to your surround speakers

Left Right

surround surround

speaker speaker

To connect the surround speakers to the receiver:

1Connect the right speaker to the right speaker terminals of the receiver, and the left speaker to the left speaker terminals.

2If the speakers have wires instead of terminals, connect the positive (+) wire from the right speaker to the Red (+) terminal for the right speaker on the receiver and the negative (-) wire from the right speaker to the Black (-) terminal for the right speaker on the receiver.

3Connect the left speaker the same way.

10