Connecting the sender

Connecting the sender to the amplifier

Surround speaker outputs

Sender back panel

Press and hold

Release

 

Caution: Turn off your amplifier while connecting the units.

To connect the amplifier to the sender:

1Using the 2-foot speaker cords (provided), connect the right surround speaker terminals of your amplifier to the right speaker terminals of the sender by connecting the red wire to the Red (+) terminals, and the black wire to the Black (-) terminals.

2Connect the left surround speaker terminals of the amplifier the same way.

Notes:

Make sure the exposed tips of each cord do not touch each other, and that they are fully inserted into the terminals.

Speaker wire colors may vary with different speaker systems.

Make sure you connect your amplifier using the surround speaker terminals only.

RF-WHTIB 9