7
INSTALLATION-SPEAKERS
Example of speaker installation
Mounting Hole,
Cut-Out
Mounting Ring
Grille
Speaker
Screw
3. Remove the ring. Drill the holes for the screws using a 1/8" drill bit.
4. Route the wire through the mounting hole cut-out.
5. Attach the wires. Observe proper speaker polarity.
6. Place the mounting ring over the speaker.
7. Place the speaker into the hole and screw the speaker into place.
8. Press the speaker grille into the mounting ring.
Use this when installing Mid Bass or 3-Way
Tweeter
Mids
Mid Bass
One Channel
From Source
or Amplifier
C
A
B