Rockford Fosgate R150-2 manual Installation

Models: R150-2

1 52
Download 52 pages 6.15 Kb
Page 7
Image 7

INSTALLATION

7.Securely mount the amplifier to the vehicle or amp rack. Be careful not to mount the amplifier on cardboard or plastic panels. Doing so may enable the screws to pull out from the panel due to road vibration or sudden vehicle stops.

8.Connect from source signal by plugging the RCA cables into the input jacks at the amplifier.

CAUTION:Always ensure power is off or disconnected at the amplifier before connecting RCA cables. Failure to do so may cause damage to the amplifier and/or connected components.

9.Connect the speakers. Strip the speaker wires 3/8", crimp the bared wire into a fork or ring style connectors and attach to the speaker terminals.Tighten the screw to secure into place. Be sure to maintain proper speaker polarity. DO NOT chassis ground any of the speaker leads as unstable operation may result.

10.Perform a final check of the completed system wiring to ensure that all connections are accurate. Check all power and ground connections for frayed wires and loose connections which could cause problems. Install inline fuse near battery connection.

NOTE:Follow the diagrams for proper signal polarity.

CAUTION:This amplifier is not recommended for impedance loads below 2 stereo and 4 bridged.

Source Unit

Amplifier

2-Channel Mode

Bridged Mono Mode

Power Connections

7

Page 7
Image 7
Rockford Fosgate R150-2 manual Installation

R150-2 specifications

The Rockford Fosgate R150-2 is a powerful and versatile car amplifier that embodies the brand's commitment to high-quality audio performance. With its impressive specifications and advanced technology, the R150-2 is designed to enhance the sound system of any vehicle, catering to both casual listeners and audiophiles alike.

One of the standout features of the R150-2 is its robust power output. The amplifier delivers 75 watts RMS per channel into a 4-ohm load, and up to 150 watts RMS at 2 ohms. This makes it ideal for driving a variety of aftermarket speakers or enhancing the power of factory-installed systems. The R150-2 is designed to ensure clarity and detail across the audio spectrum, allowing users to enjoy their favorite music with enhanced depth and richness.

The R150-2 employs Class AB technology, which is known for providing excellent sound quality with minimal distortion. This means that users can enjoy loud volumes without sacrificing audio fidelity. The amplifier also features a variable high-pass crossover, allowing users to tailor the frequency response to suit their listening preferences and the specific characteristics of their speakers.

Another notable aspect of the R150-2 is its user-friendly design. The amplifier is equipped with a remote gain control, which allows for easy adjustments to the output level from the driver's seat. This feature is particularly useful for fine-tuning the system without having to reach for the amplifier directly.

Durability and reliability are also key characteristics of the R150-2. It comes with a cast aluminum heatsink, ensuring effective heat dissipation, which is crucial during prolonged use. The amplifier also features short-circuit and thermal protection, safeguarding the unit from damage while providing peace of mind to users.

Installation of the R150-2 is straightforward, thanks to its compact size and easy-to-follow wiring diagram. Its design includes a high-quality connector for power and speaker outputs, ensuring solid and reliable connections.

Overall, the Rockford Fosgate R150-2 is a formidable choice for anyone looking to upgrade their car's audio system. With its powerful output, sound-enhancing technologies, and user-friendly features, it stands out as a top contender in the amplifier market, making it an excellent investment for sound enthusiasts seeking to elevate their in-vehicle listening experience.