AMX G3 manual Installing Touch Panels

Figure4

AXU-CV(/PB) or AXU- CA(/PB) and low-profile back box

Installing Touch Panels

Overview

The section describes how to mount, wire, and clean Touch Panels.

Mounting the Touch Panels

The following paragraphs describe how to mount the UniMount and rack-mount Touch Panels. The TiltScreen Touch Panel can be placed on any flat surface.

AXU-CV(/PB), AXU-CA(/PB), and low-profile back box

Mount the AXU-CV(/PB), AXU-CA(/PB), and low-profile back box (Figure 4):

Low-profile back box

AXU-CV(/PB) or AXU-CA(/PB) bezel

Engraved

Release slot

1.Make a cutout in the surface according to the dimensions shown in Figure 5 for a low-profile back box.

Color Active-Matrix LCD Touch Panels Installing Touch Panels 5