Figure68
BUTTON PROPERTIES (JOYSTICK) page
Note
If you continued the procedures from the Adding a joystick to a page subsection, this will be the button's properties page when you select it.
Setting the channel code
1.The two fields to be set for the joystick channel code are DEV (device) and CHAN (channel) as shown in Figure 69.
Figure69
Joystick CHANNEL code buttons
Note
The channel code for non- active buttons is 0, and for active buttons it's 1 through 255.
2.Press DEV to open a keypad and set the joystick’s device number.
3.Type 1, 2, 3, or 4 in the keypad. The device number specifies the device number for the selected channel’s feedback is displayed.
4.Press ENTER to store the device code in memory, close the keypad, and return to the BUTTON PROPERTIES page.
5.Press CHAN to open the keypad and set the channel number.
6.Type in a channel value of 1 to 255 in the keypad. The AXCESS software program uses the channel code number to identify the button and programmed operations.
46 | Designing a Touch Panel Page | Color |
