AMX G3 manual Setting the level code, Setting the joystick colors for channel-off conditions

7.Press ENTER to store the channel code in memory, close the keypad, and return to the BUTTON PROPERTIES page.

Setting the level code

1.There are two fields in the LEVEL section: DEV (device) and NUM (number), as shown in Figure 70.

Figure70

Level code buttons

Note

Each device can have from 1-8 levels except for joysticks where the range is from 1-7.

2.Press DEV to open a keypad and set the device code.

3.Type 1, 2, 3, or 4 in the keypad. The AXCESS software program uses device codes 1 through 4 to identify the Touch Panel. For more information, refer to the Touch Panel Program Reference section.

4.Press ENTER to store the level device code in memory, close the keypad, and return to the BUTTON PROPERTIES page.

5.Press NUM in the LEVEL section to open a keypad and set the level number assigned to the device.

6.Type 1 in the keypad.

7.Press ENTER to store the level number in memory, close the keypad, and return to the BUTTON PROPERTIES page.

Setting the joystick colors for channel-off conditions

1.Press BORDER in the COLOR (CHANNEL OFF) section of the BUTTON PROPERTIES page (Figure 71) to set the border color.

Figure71

CHANNEL OFF/ON COLOR settings box

2.Press black on the color palette (Figure 72) to set the border color.

Color Active-Matrix LCD Touch Panels Designing a Touch Panel Page 47